uPVC Door Repair Bristol — Same Day, From £49, No Call-Out Fee
Last updated: June 2026 · Prices verified
Your door isn’t broken. The mechanism inside it is.
If your uPVC door handle spins loosely, won’t lift, or the door won’t lock at all, the frame and panel are almost certainly fine — a single internal component has failed. Replacing it costs from £49 and takes under an hour. A replacement door costs £800–£2,500 and takes weeks.
We repair uPVC doors and windows across Bristol and North Somerset, carrying gearboxes, multipoint strips, handles and cylinders for all major systems — Yale, ERA, Maco, GU, Fullex, Mila, Winkhaus and Avocet — on every van. That’s why most repairs are done in a single visit, with no parts ordering and no second appointment.
📞 Call 07486 889391 — describe the fault, get a fixed price on the phone 💬 WhatsApp a photo of your door edge and handle — instant diagnosis
Quick Diagnosis — What’s Wrong With Your Door?
| Symptom | Likely fault | Fix time | Price |
|---|---|---|---|
| Handle spins loosely, no resistance | Broken gearbox | Under 1 hour | From £99 + parts |
| Handle won’t lift up to lock | Gearbox or alignment | 30–60 min | From £49 |
| Door drags or catches at the bottom | Dropped door — hinge wear | Under 30 min | From £49 |
| Hooks/bolts not engaging the frame | Multipoint strip or keeps | 1–2 hours | From £99 + parts |
| Key stiff or turns without unlocking | Worn cylinder | Under 20 min | From £49 + parts |
| Door locked shut, won’t open | Failed gearbox or snapped spindle | Under 1 hour | From £79 |
| Latch won’t catch — door swings open | Latch cassette or striker | Under 30 min | From £49 |
| Window handle broken or won’t lock | Espag lock or handle | Under 30 min | From £39 + parts |
All prices fixed before we travel. No call-out fee at any time.
The Most Common uPVC Faults in Bristol Homes
Handle Spins or Won’t Lift — Failed Gearbox
The single most common uPVC repair in Bristol. The gearbox — the centre case behind the handle — wears out after roughly 7–15 years of daily use and eventually shatters internally, often with an audible crack. Once it goes, nothing along the door edge moves.
Don’t force it. Forcing a failed gearbox can jam the hooks in the locked position, turning a simple swap into a full non-destructive entry job.
From £99 + parts. Under 1 hour.
Door Won’t Lock — Alignment or Multipoint Strip
If the hooks and rollers aren’t meeting the keeps on the frame, the cause is usually a dropped door rather than a broken mechanism. A surprising number of “broken lock” call-outs across Bristol are resolved with a hinge adjustment and keep reset alone.
Where the strip is genuinely damaged, we carry full-length multipoint mechanisms for all common door heights.
Alignment from £49 · gearbox from £99 + parts · full strip from £149 + parts.
Door Won’t Lock in Hot Weather
uPVC expands in heat. If your door locks fine in spring but jams every warm spell, it’s sitting too tight in the frame — and forcing the handle during those periods is exactly what shatters gearboxes. A professional realignment gives year-round clearance.
From £49.
Dropped Door — Dragging, Catching, Stiff to Lock
Heavy use and settlement pull uPVC doors out of alignment. Left unfixed, this destroys the gearbox and strip. Hinge adjustment is always the first thing we try — often the only fix needed, and the cheapest job on our list.
From £49. Under 30 minutes.
Worn Cylinder
A cylinder that’s stiff, intermittently refuses the key, or turns without operating the lock needs replacing — a 20-minute job. We carry standard and 3-star anti-snap TS007 cylinders in all common sizes.
From £49 + parts.
Bristol Housing Stock — What We See Most
Bristol’s mix of housing means we work on an unusually wide range of uPVC systems:
- Victorian and Edwardian terraces across Horfield, Bishopston and Ashley Down (BS7) — many have replacement uPVC front and rear doors fitted in the 1990s–2000s, now reaching the age where gearboxes fail
- 1930s semis in Westbury-on-Trym, Henleaze and Stoke Bishop (BS9) — typically uPVC back doors and French doors, often with older Fullex and Mila mechanisms
- Post-war and 1970s estates in Fishponds, Staple Hill and Mangotsfield (BS16) — heavy uPVC density, most commonly gearbox and handle failures
- 1970s–90s housing in Warmley, Longwell Green, Hanham and Oldland Common (BS30) — dropped doors are especially common here as mechanisms reach end of life
- Keynsham and Saltford (BS31) — mixed stock; uPVC and composite doors with a range of multipoint systems
- Yate and Chipping Sodbury (BS37) — as a planned town, Yate has exceptional uPVC density across its estates. We attend more gearbox jobs here than almost anywhere in the Bristol area
- New-build estates at Emersons Green and Lyde Green (BS16) — composite doors with high-security cylinders; typically alignment and cylinder work rather than gearbox failure
If your mechanism is discontinued, we retrofit modern equivalents — including systems other locksmiths turn away.
uPVC Window Repairs
Ground-floor windows are a burglary target and an insurance compliance point. We repair and replace:
- Espagnolette locking strips — the full mechanism behind the handle, all major brands
- Window handles — replaced with key-locking versions where requested
- Friction stays (hinges) — restoring a proper draught-free seal
- Window cylinders and barrels
From £39 + parts. Usually under 30 minutes per window.
Anti-Snap Upgrade — Worth Doing While We’re There
Standard Euro cylinders on uPVC and composite doors can be snapped in under 30 seconds with widely available tools — the most common forced-entry method on these doors in the UK. While we’re on site for any repair, we’ll upgrade to a 3-star TS007 anti-snap cylinder (Avocet ABS, Brisant Ultion or Mul-T-Lock) for minimal extra cost.
From £69 + parts as an add-on to any visit.
Prices — uPVC Repairs Bristol
| Job | Price |
|---|---|
| Hinge adjustment & realignment | From £49 |
| Handle replacement | From £49 + parts |
| Cylinder replacement | From £49 + parts |
| Anti-snap upgrade (TS007 3-star) | From £69 + parts |
| Gearbox (centre case) replacement | From £99 + parts |
| Full multipoint strip replacement | From £149 + parts |
| Window espagnolette lock | From £49 + parts |
| Window handle | From £39 + parts |
| Out-of-hours supplement | +£20–£30 |
Areas We Cover Around Bristol
BS7 — Horfield, Bishopston, Filton, Ashley Down, Lockleaze BS9 — Westbury-on-Trym, Henleaze, Stoke Bishop, Sea Mills, Coombe Dingle BS16 — Fishponds, Downend, Frenchay, Staple Hill, Mangotsfield, Emersons Green BS30 — Warmley, Longwell Green, Hanham, Bitton, Oldland Common, Cadbury Heath BS31 — Keynsham, Saltford, Burnett BS37 — Yate, Chipping Sodbury, Iron Acton, Wickwar
Not sure if we cover your street? Call 07486 889391 — we’ll confirm in seconds.
Why Repair Instead of Replace?
| Repair with us | New door from a double-glazing firm | |
|---|---|---|
| Cost | £49–£199 + parts | £800–£2,500 |
| Time | Under 1 hour, same day | 2–6 week lead time |
| Security after | Identical standards | Identical standards |
| Sales pressure | None — fixed phone quote | Commission-based survey |
Replacement only genuinely wins when the frame is cracked or warped, or the glass unit has failed and you want it changed anyway. If yours is one of those rare cases, we’ll tell you straight — and if we can’t fix it, you don’t pay.
Why Choose Us
✅ Parts on every van — gearboxes, strips, handles and cylinders for all major systems, including obsolete ones
✅ Fixed price on the phone or by WhatsApp photo — the quote is the price you pay
✅ No call-out fee, ever — and if we can’t fix it, you don’t pay
✅ Repair-first policy — we never upsell a new door or a part you don’t need
✅ 12-month guarantee on all parts and labour
✅ DBS Police-Checked, fully insured — photo ID on every visit
Frequently Asked Questions
Why won’t my uPVC door lock in Bristol?
The three most common causes are a failed gearbox (if the handle spins or flops loosely), a dropped door putting the hooks out of alignment with the keeps (if the door drags or you have to lift the handle hard), or a worn multipoint strip. All are same-day repairs from £49.
How much does uPVC door repair cost in Bristol?
A hinge alignment costs from £49. A gearbox replacement from £99 plus parts (gearboxes typically £30–£80). A full multipoint strip from £149 plus parts. We confirm a fixed total on the phone before travelling — no call-out fee.
How long does a uPVC door repair take?
Most repairs take 30–60 minutes. A hinge adjustment is usually under 30 minutes; a gearbox swap under an hour; a full strip 1–2 hours. Over 95% of jobs are completed in a single visit.
My handle won’t lift up — is it the handle?
Rarely. A handle that won’t lift almost always means a failing gearbox or a door alignment issue, not the handle itself. Forcing it is what finishes the gearbox off — stop using it and call us.
Can you repair an old door if the mechanism is discontinued?
Yes — this is a speciality. We carry retrofit strips and gearbox conversions that adapt modern mechanisms to older doors, including systems other companies turn away.
Do you cover Keynsham, Yate and Fishponds?
Yes — we cover BS7, BS9, BS16, BS30, BS31 and BS37, including Fishponds, Downend, Emersons Green, Keynsham, Saltford, Yate, Chipping Sodbury, Warmley and Longwell Green.
Is it worth repairing rather than replacing my uPVC door?
Almost always. The frame and profile last 30+ years; the internal mechanisms are inexpensive wear items. Repair costs £49–£199 plus parts and takes an hour. A new door costs £800–£2,500 with weeks of lead time.
Do you repair uPVC windows too?
Yes — espagnolette locking strips, handles, friction stays and barrels, all major brands, from £39 plus parts, usually under 30 minutes per window.
Door Not Locking Right Now?
Send a WhatsApp photo of your door edge and handle for an instant diagnosis, or call and describe the fault.
📞 07486 889391 — 24/7, including weekends and bank holidays
💬 WhatsApp photo diagnosis — fixed quote before we travel
From £49 · No call-out fee · Same day · 12-month guarantee · DBS checked